Lab data sheet

Decorative Beam 10x5

See colors
Category
Decorative beam
Application
Pergolas and screens
Material
Co-extruded WPC
Test methods
5 ASTM methods

Decorative only — not structural

01

Dimensions and weight

Length9.8 ft (300 cm)
Width3.9 in (10 cm)
Height2 in (5 cm)
Cap layer thickness0.02 in (0.5 mm) ± 1 %

Max Shield co-extruded cap

Weight per piece16.3 lb (7.4 kg) ± 10 %
Nominal dimensions in centimeters
02

Composition

60%
27%
13%
WoodPolymerAdditives

Results from our in-house quality lab, tested per ASTM methods. These are not third-party test reports or a building code evaluation.

03

Flexural strength · ASTM D790

Flexural strength70.196 N (15.8 lbf)
Typical range 20 – 50 N (4.5 – 11.2 lbf)Outstanding, above the typical range
Maximum load127.333 N (28.6 lbf)
Typical range 80 – 200 N (18 – 45 lbf)Within the typical range
Stress at break37.476 N (8.4 lbf)
Typical range 15 – 40 N (3.4 – 9 lbf)High end of the typical range
04

Tensile strength · ASTM D638

Tensile modulus2,427.053 MPa (352 ksi)
Typical range 1,000 – 4,000 MPa (145 – 580 ksi)Within the typical range
Maximum load1,239.953 N (278.8 lbf)
Typical range 500 – 2,500 N (112.4 – 562 lbf)Within the typical range
Tensile strength30.8 MPa (4,467 psi)
Typical range 10 – 30 MPa (1,450 – 4,351 psi)High, above the typical range
05

Color stability · ASTM G155

Accelerated weathering. Delta E measures how far the color has shifted from the original piece. Below 3, the human eye can't see the change.

≤3 Excellent≤5 Good≤8 Acceptable limit≤12 Unacceptable

1,000 hours

0.36ΔE

12 % of the “Excellent” limit (ΔE 3)

No visible difference

2,000 hours

0.43ΔE

14 % of the “Excellent” limit (ΔE 3)

No visible difference

3,000 hours

1.29ΔE

43 % of the “Excellent” limit (ΔE 3)

Barely visible difference

06

Water absorption · ASTM D570

24-hour water absorption1.63 %
Typical range Low 0.5 – 2 % · Medium 2 – 5 % · High > 5 %Within the low-absorption range
07

Dimensional stability · ASTM D1037

How much the piece expands and contracts, measured out from the center line. The closer to zero, the more stable.

−0.5% risk0+0.5% risk

Dashed line = “Excellent” limit (±0.25 %)

Contraction

-0.033%

Expansion

+0.066%

Rating

Excellent

08

Logistics and packaging

PackagingPalletized
Pieces per pallet200
Pallet footprint118 × 46 in (3 × 1.17 m)
Pallet height43.3 in (1.1 m)
09

ASTM test methods used

ASTM D790Flexural strength
ASTM D638Tensile strength
ASTM G155Accelerated weathering (color stability)
ASTM D570Water absorption
ASTM D1037Dimensional stability
10

Available colors

Stock colors (6)

  • IPE color sample
    IPE
  • Teka color sample
    Teka
  • Incienso color sample
    Incienso
  • Chesnut color sample
    Chesnut
  • Antique color sample
    Antique
  • Mocha color sample
    Mocha

Made-to-order colors (6)

  • Maple color sample
    Maple
  • Mahogany color sample
    Mahogany
  • Ash Gray color sample
    Ash Gray
  • Dark Gray color sample
    Dark Gray
  • Obsidiana color sample
    Obsidiana
  • Off-white color sample
    Off-white
11

Important information

Installation guide

Follow the current installation guide to get the performance shown on this sheet.

Thermal expansion

WPC expands and contracts with temperature changes. Leave the gaps specified in the installation guide.

Color variation

WPC is made to look like natural wood, so expect slight color variation from piece to piece. It stays within the tolerances set by our quality team, does not affect performance and is not a manufacturing defect.

Maintenance

Clean regularly with mild soap and water. Avoid solvents, abrasives and tools that can damage the surface.

Outdoor use

Designed for exterior use only.